Double wall fixed louvred louvers with inclination, model UPO-150 with clamps
UPO-150 louvers with clamps are a solar protection system, with double-wall fixed louvers, available at 45, 60 or 90 degree inclination. Thanks to the clamp anchorage, this system adapts to the expansion of the lattices, and due to its strong support, it allows large distances between supports.
Description for projects
UMBELCO UPO-150 type aluminum fixed louvers with 45°, 60° or 90° double-wall clamps with double reflection visible surface in aluminum 154 mm wide and 30 mm thick. Made of aluminum strip continuously painted (COIL-COATING process), with high resistance to weathering according to salt spray test (more than 450 h in WEISS SSC 450 chamber). Tubular rails and clamps in extruded aluminum L-6063 with T5 treatment, assembled by means of an efficient patented anti-return system that allows the expansion of the slats without riveting or screws between the slat and the support.
They are optionally available in any color of the RAL range with interior colors different from the exterior, with perforated slats and with slats in materials such as aluminum, steel, zinc or copper.
COMPONENTS
The assembly consists of a series of double-walled aluminum slats with a rhomboidal cross-section, parallel to each other and with a pre-determined inclination. The slats are supported by composite clamps, which in turn are anchored to extruded aluminum tubular profiles, sized according to the project requirements.
FIXED BLADES | UPO-150 with clamps
Can UPO-150 with clamps be installed with the blades horizontal / vertical?
Yes, the UPO-150 with clamps can be installed horizontally or vertically.
Are there other tilt options available for this model?
No. The inclinations provided for the UPO-150 with clamps are optimized for its function as a sunshade. For customized tilt solutions, we recommend UPF-150 or consult with our experts.
What is the maximum spacing between the support battens?
Regardless of whether it is a lattice with vertical or horizontal slats, the maximum distance between supports is 200 cm.
What are the characteristics of the supporting strip of this lattice?
One of the advantages of the UPO-150 with clamps is that they allow the incorporation of most of the existing commercial profiles, both in aluminum and steel, to adapt the product’s capacities to the project’s needs.
What is the maximum length of UPO-150 fixed slats with clamps?
The slats can be made in 600cms in one piece, but the supporting battens of these slats must maintain a maximum cadence of 200cms.
I want more light / more ventilation, how can I get it?
This model has no limitation in the slat center-to-center spacing. Simply increase it to meet the requirements of your project.
How often do I have to put fixings on this truss?
Thanks to the availability of support profiles, this truss can avoid the limitation of fixings every 120cms. Please contact our consultants to calculate the exact dimension for your project.
I have doubts about the anchors, how can I solve it?
Properly fastening a truss is important. Therefore, the best answer is to
contact our technicians
and shortly, you will have a specific answer for your project.
My project does not meet any of the prerequisites, what can I do?
If the maximum distance between supports or fixings is not met,
send us information about your project
and we will advise you about the specific solutions for your project.
Where can I get details in CAD format?
Contact with us
. Our prescription department will send you the details shortly.