Fixed louvred blinds without inclination, model UPE-80×20
UPE 80×20 tubular aluminum louvers are made up of flat rectangular fixed blades and are quick to install thanks to their patented clipping system. Its configuration makes it possible to distance, at the user’s will, the distance between each slat, providing a harmonious and stylized appearance to any type of construction. It is especially suitable for representative buildings or facades with unique designs.
Description for projects
UMBELCO UPE 80×20 type rectangular tubular fixed louvred truss of L-6063 alloy with T5 treatment, designed to form a truss with louvers arranged in parallel with a 90° inclination, with variable pitch, and a section of 80×20 mm. Supported by extruded aluminum tubular battens made of L-6063 alloy and T5 treatment, with suitable recesses to accommodate the slats.
They are available lacquered in any color of the RAL range or in a series of standard anodized finishes.
COMPONENTS
Rectangular aluminum fixed tubular slats of 80×20 mm supported by aluminum battens that house them. The patented non-return system allows the expansion of the slats without riveting them or fastening screws between the slat and the support.
VARIANTS
The louvers can be horizontal, vertical, cantilevered, mitered, with various corner pieces. The frames can be fixed, sliding, hinged, lifting, folding or booklet.
FIXED SHEETS | UPE 80x20 | EXAMPLES
Can UPE-80X20 be installed with horizontal / vertical blades?
Yes, the UPE-80X20 can be installed horizontally or vertically.
What slat pitch is available?
The UPE-80X20 are only available with a 0º inclination, although the blades allow a wide range of spacings between axes.
What is the maximum length of UPE-80X20 fixed blades?
The slats can be made in 600cms in one piece, but the supporting battens of these slats must maintain a maximum cadence of 120cms.
I want more light / more ventilation, how can I get it?
This model has no limitation in the slat center-to-center spacing. Simply increase it to meet the requirements of your project.
What is the maximum spacing between the support battens?
Regardless of whether it is a truss with vertical or horizontal slats, the maximum distance between supports is 120 cm.
How often do I have to put fixings on this truss?
The joists need to be fastened every 120 cm, both horizontally and vertically, regardless of the arrangement of the slats.
I have doubts about the anchors, how can I solve it?
Properly fastening a truss is important. Therefore, the best answer is to
contact our technicians
and shortly, you will have a specific answer for your project.
My project does not meet any of the prerequisites, what can I do?
If the maximum distance between supports or fixings is not met,
send us information about your project
and we will advise you about the specific solutions for your project.
Where can I get details in CAD format?
Contact with us
. Our prescription department will send you the details shortly.