Aluminum adjustable louvers, model UPO-105
UPO 105 movable louvers are the perfect ally for discreet, versatile and resistant solar protection. Thanks to the modularity of its frames and the quality of its components, this system is perfect for medium-sized openings, sliding frames or multi-leaf bookcases and, in general, any residential installation with solar protection needs.
Description for projects
UMBELCO model UPO 105 adjustable aluminum louvers, with maximum resistance classification PV4 according to UNE 85-226-87 and UNE 85-227-87 standards and manufactured in continuous painted aluminum strip (COIL-COATING process), with high resistance to weathering according to salt spray test (more than 450 h in WEISS SSC 450 chamber). End ends of slats in PA 6 (nylon) of high resistance. Aluminum shafts with a minimum diameter of 6 mm and housed in an extruded aluminum support structure L-6063 with T5 anodized or lacquered treatment.
They are optionally available in any color of the RAL range with interior colors different from the exterior and in materials such as aluminum, steel, zinc or copper.
COMPONENTS
The UPO-105 type aluminum adjustable louvers are composed of profiled aluminum rhomboidal blades, tongue and groove and finished with polyamide end caps with maximum impact resistance. It has 6 mm diameter pivots on extruded aluminum frames L-6063 and T5 treatment in section of 40×40 millimeters.
VARIANTS
This louver can be installed with the slats in horizontal or vertical position, with the slats perforated on one or both sides, and as a novelty, they are available with slats in one color on each side.
The frames on which the slats pivot can be sliding, hinged or lift-and-slide, and combine with the same exterior appearance with the UPF-105 fixed slat system and the UPR-105 façade cladding system.
MOVABLE LOUVERS | UPO-105
Frequently Asked Questions
What is UPO-105 made of?
The UPO-105 blades are aluminum, the frames are aluminum, the synchronization systems are aluminum, the control is cast iron, and the end caps are high-strength nylon and aluminum. All components are 100% recyclable at the end of their useful life.
Can UPO-105 be installed with horizontal / vertical blades?
Yes, the UPO-105 can be installed horizontally or vertically.
What drive options are available for this lattice?
UPO-105 louvers can be operated manually or motorized, depending on the needs of each project. Contact us for our recommendations.
What is the maximum length of UPO-105 blades?
The UPO-105 slats can be up to 250 cm long in one piece, both vertically and horizontally.
On what type of frames can I mount this lattice?
UPO-105 are usually installed on closed perimeter frames made of 40x40mm aluminum tubing. Optionally, it can be supplied in other tube sections, or without the part of the frame that runs parallel to the slats.
I want an access area with these adjustable slats, is it possible?
Yes. This lattice can be mounted on movable frames, such as hinged doors, sliding frames, lifting leaves, or even retractable systems.
I have doubts about the anchors, how can I solve it?
Properly fastening a truss is important. Therefore, the best answer is to
contact our technicians
and shortly, you will have a specific answer for your project.
My project does not meet any of the prerequisites, what can I do?
If the maximum length of the slats is not met or you need special fasteners,
send us information about your project
and we will advise you about the specific solutions for your project.
Where can I get details in CAD format?
Contact with us
. Our prescription department will send you the details shortly.